City Walls

  TableScape Home Banner Picture
Home Workshop Catalogue Stockists Ordering Retail Info Links Gallery Contacts
 

This range contains models to represent the defensive fortifications that were built to protect a cities in the Middle East, Central Asia and India.  There are sections of walls, an Islamic inspired gateway, high towers and lower projecting bastions.  They all have rounded crenulations and are constructed of regular stone blocks.

Click for a larger image

Click for larger image

Click for a larger image

Click for larger image

Description Contents Price GBP

HICW001 - City Gate

This pack contains 1 city gate.  This piece is 160mm wide, 85mm deep and 110mm high at the highest point.  The walkway is 45mm deep and stands 75mm above ground level.

Click here to see the reverse of this piece.

Click here to see the City Wall and City Gate pieces together - front view - rear view.

1 Piece £25.00
Click for a larger image

Click here for larger image

HICW002 - City Wall

This pack contains 1 city wall section.  This piece is 160mm wide, 55mm deep and 95mm high at the highest point.  The walkway is 35mm deep and stands 60mm above ground level. 

Click here to see the reverse of this piece.

Click here to see the City Wall and City Gate pieces together - front view - rear view.

1 Piece £16.00
Click for a larger image

Click here for larger image

HICW003 - 2 x City Wall

This pack contains 2 city wall sections. See above of a description of these pieces.

Click here to see the City Wall and City Gate pieces together - front view - rear view.

2 Pieces £30.00
Click for a larger image

Click here for larger image

HICW004 - 1 x City Gate + 2 x City Wall

This pack contains 2 city wall sections and a city wall piece. See above of a description of these pieces.

click here to see the City Wall and City Gate pieces together - front view - rear view.

3 Pieces £53.00
Click for a larger image

Click here for larger image

HICW005 - 1 x City Gate + 4 x City Wall

This pack contains 4 city wall sections and a city wall piece. See above of a description of these pieces.

Click here to see the City Wall and City Gate pieces together - front view - rear view.

5 Pieces £80.00
Click for a larger image

Click here for larger image

HICW006 - City Corner Tower

This pack contains 1 city corner tower. The tower has a base at ground level of 135mm by 135mm, and it is 120mm high.  The area at the top of the tower, within the crenulations, is 100mm by 100mm, and stands 80mm above ground level.

Click here to see other views of the corner tower - first view - second view.

Click here to see the corner tower together with the City Wall and City Gate pieces - first view - second view - third view - fourth view.

1 Piece £32.00
Click for a larger image

Click here for larger image

HICW008 - City Wall Expansion

This pack contains 2 tumbled down wall sections and 2 different sets of stairs.

The tumbled down wall sections are slightly less than 80mm wide, 55mm deep and 95mm high at the highest point.  The walkway is 35mm deep and stands 60mm above ground level.  

The stairs are designed to be the same height as the walkway of the straight wall sections.  The first set are a straight flight 30mm wide, 60mm high and 85mm long.  The second flight turn back on themselves with a landing midway.  They are 60mm high, 60mm wide and 75mm long

The other side of the pack can be seen here

This shows more views of the models. 

Here are the broken down section shown replacing a section of straight wall. 

Finally here is a rear view showing the stairs against a corner tower and wall section.

4 Pieces £22.00
Click for a larger image

Click here for larger image

HICW009 City Wall Bastion

This pack contains 1 city wall bastion. This piece is 160mm wide, 190mm deep and 95mm high at the highest point. The walkway at the back is 35mm deep and stands 60mm above ground level, the same as the city wall sections.

The bastion will project approximately 130mm in front of a line of city wall sections. The interior area of the bastion has a rectangle 115mm by 75mm adjacent to the walkway, and then a semi-circular area 115mm in diameter at the end. The interior area is at the same level as the walkway at the back.  The total depth of the interior area is 170mm from the rear edge of the walkway to the apex of the semi-circular area.

Click here to see the reverse of this piece.

1 Piece £32.00
Click for a larger image

Click here for larger image

Return to top

Return to Catalogue Page

 
Copyright ©TableScape. All rights reserved.